Paper Machine Forming Fabrics

- Aug 28, 2017-

KaiBang polyester forming fabrics, a wide range of excellent forming fabrics to fulfill all customer expectations: 

GapMaster

  • SSB triple layer fabric

  • for paper and board machines that require excellent printability

  • good fiber support – high mechanical retention

  • no fabric marking

  • very stable fabric with uniform paper profiles

  • minimal fiber or water carry to the return run

  • long life potential

OptiProof

  • thin with high stability

  • especially suitable for

  • gap former outer positions and positions where high fiber support is needed

  •  where thin fabric but high wear resistance is needed

  • low MD bending stiffness – transfer pulses – good turbulence – improved formation

  • improved printability

  • lower break rate

  • more even paper profiles

  • long running times

  • high wear resistance and safe to use the whole potential

OptiPack

  • stable SSB fabric with very high wear resistance

  • especially suitable for packaging grade and container board machines

  • especially suitable for fourdriniers and bottom positions of gap and hybrid formers

  • high wear potential and strong seam

  • long running times

  • low risk of fabric break, whole potential can be utilized

  • open paper side structure

  • well working trimming

  • high dry content

PackMaster PM and PMD

  • durable SSB triple layer fabric

  • for packaging paper and board machines

  • good fiber support – high mechanical retention

  • excellent wear margin – very good life potential

  • excellent dimensional stability for good paper profiles

HiSpeed

  • thin SSB triple layer fabric

  • mainly for fast gap former paper machines

  • targeting very high dry content after forming section

  • very good fiber support for good printing quality

  • easy to keep clean – no fiber or water carry to the return run

  • excellent edge trimming

AbraWin

  • wear resistant SSB fabric giving high mechanical retention

  • especially suitable for fine papers, wear prone positions and positions where high mechanical retention is needed

  • high wear margin

  • long running times

  • more material to wear

  • high amount of wear side CMD-yarns

  • good paper quality

  • lower porosity

  • higher turbulence improves formation

Citius

  • very thin fabric with special DL weaving structure

  • especially suitable for newsprint and LWC grades

  • low void volume – clean run

  • low MD bending stiffness – good formation

  • effective drainage – high dry content 

  • good fiber support – high retention

OptiStar

  • double layer fabrics

  • for all paper and board grades

  • good machine runnability

  • high dry content after forming section

  • stable DL fabric with uniform paper profiles

  • easy to keep clean

OptiStar E

  • stable 2.5 layer fabrics (DL-EWA)

  • suitable for all paper and board machines

  • good fiber support

  • high dry content after forming section

  • low energy consumption

Champion

  • coarser 2.5 layer fabric

  • for packaging paper and board machines

  • high dewatering capacity

  • very good dimensional stability

  • low energy consumption

  • high wear margin – good life potential

MultiStar

  • triple weft fabric

  • special fabric for paper and board machines

  • high CMD stiffness for excellent paper profiles

  • excellent CMD stability – excellent paper profiles

  • good fiber support for printing good printing quality

  • low energy consumption

ForTiss

  • very low caliper warp bound tissue fabric

  • suitable for all and SBR former tissue machines

  • high dry content

  • super thin structure, low resistance of flow

  • high retention and clean paper machine

  • excellent CMD fiber support

  • high yarn count on paper side

  • excellent paper formation